TubSKIN is a water-based peelable coating that provides temporary protection to all spas, baths and sanitary ware surfaces. The unique paint on, peel off application / removal process makes protecting valuable surfaces fast and easy.

TubSKIN protects against scratched and chips from foot traffic, general building debris, dropped tools, plaster, grout & paint removal.

TubSKIN is suitable for the surface such as enamel, gel-coated fiberglass, acrylic and vitreous china.

TubSKIN qualities including lasts up to 12 months, cannot fall off or bake on, will not leave any residue, impenetrable to dirt and not effected by water.

Product Information:
Package: 4 litres, 15 litres and 20 litres
Coverage: 1 litre protects 9.63m² at 60μm
Drying time: 10mins to 1 hour
Curing time: 24 hours
Recommended use: 9 to 12 months

Preparation:

1. Ensure TubSKIN it stirred / shaken throughly.
2. Ensure surface to be protected is clean and dry.
3. Use a thick nap (20mm or 3/4’’) acrylic fibre paint roller that is clean and dry, or already soaked in TubSKIN.

Application:

1. Use paint roller to apply TubSKIN liberally to surface being protected.
2. Create a neat finish at border of application by slightly titling the roller towards the border. This technique will create a lip at the edge of the application and will avoid a feathered edge.
3. Leave a small gap at all junctions, corners and gaps.
   

Removal:

1. Start at one corner of membrane and gently peel-off taking care to keep the membrane in one sheet.
2. Water may be required to aid release and wash surface with warm soapy water.
3. Ensure surrounding surfaces are completely washed down and all TubSKIN pieces are removed.