MarineSKIN is a water-based peelable coating that provides temporary protection to all non-porous marine surfaces during manufacture. The unique paint on, peel off, application / removal process makes protecting valuable surfaces fast and easy.

MarineSKIN protects all applicable boat floor and wall areas from scratches, chips, burns and general damage caused by foot traffic, general scuff damage, dropped tools, grinding sparks, tool boxes, removal of rubbish debris, tool belts, removal of dried, wet materials and lead rubbing.

MarineSKIN is suitable for gel coated-fibreglass (smooth, or rough patterned.

MarineSKIN qualities including last up to 12 months, cannot fall of or bake on, will not leave any residue, dirt cannot get underneath skin and water does not effect protection.

Product Information:
Package: 4 litres, 15 litres and 20 litres
Coverage: 1 litre protects 9.63m² at 60μm
Drying time: 10mins to 1 hour
Curing time: 24 hours
Recommended use: 9 to 12 months

Preparation:

1. Ensure MarineSKIN it stirred / shaken thoroughly.
2. Ensure surface to be protected is clean and dry.
3. Use a thick nap (20mm or 3/4’’) acrylic fibre paint roller that is clean and dry, or already soaked in MarineSKIN.

Application:

1. Use paint roller to apply MarineSKIN liberally to surface being protected.
2. Create a neat finish at border of application by slightly titling the roller towards the border. This technique will create a lip at the edge of the application and will avoid a feathered edge.
3. Leave a small gap at all junctions, corners and gaps.
   

Removal:

1. Start at one corner of membrane and gently peel-off taking care to keep the membrane in one sheet.
2. Water may be required to aid release and wash surface with warm soapy water.
3. Ensure surrounding surfaces are completely washed down and all MarineSKIN pieces are removed.