dbzeroSKIN is a water –based coating that can be applied to a variety of materials to reduce airborne and structural sound transmission. The unique paint on and peel off application / removal process makes reduction of unwanted noise pollution fast and easy.

dbzeroSKIN protects variety of materials including aluminium surface, glass surface, fiberglass, rubber, tiles, marbles, timber, paintworks, porous and non-porous surface, brick wall, concrete wall and masonry wall surface.

dbzeroSKIN reduces unwanted noise pollution including air traffic noise, car traffic noise, construction noise, home theatre systems, home audio systems and foot traffic.

dbzeroSKIN qualities including broad spectrum attenuation, easy to apply, economical, custom colours available, water, grease and oil resistant and not effected by water.

Product Information:
Package: 4 litre, 15 litre and 20litre
Coverage: 1 litre protects 1.62m² at 350μm
Drying time: 10 mins to 1 hour
Curing time: 24 hours to 72 hours
Maximiun Use: Permanent Product

Preparation:

1. Ensure dbzeroSKIN it stirred / shaken thoroughly.
2. Ensure surface to be protected is relatively clean and dry.
3. Use a thick nap (20mm or 3/4”) acrylic fibre paint roller that is clean and dry, or already soaked in dbzeroSKIN.

Application:

1. Use paint roller or spray to apply dbzeroSKIN liberally to surface being protected.
2. Create a neat finish at border of application by slightly tilting the roller towards the border. This technique will create a lip at the edge of the application and will avoid a feathered edge.
3. Leave a small gap at all junctions, corners and gaps.

Removal:

1. Start at one corner of membrane and gently peel-off taking care to keep the membrane in one sheet.
2. Water may be required to aid release and wash surface with warm soapy water.
3. nsure surrounding surfaces are completely washed down and all dbzeroSKIN pieces are removed.